View previous topic :: View next topic |
Author |
Message |
Anonymous Guest
|
Posted: Thu Jul 10, 2008 1:55 pm Post subject: problem with using PATB |
|
|
i do AT complete and create export PATB files ( with out file of orientation parameters) and then use these files in "measurements and adjusted results import ( PATB format)" dialog box for restore AT condition but i see measurement points are move and are not in correct place
please guidance me.
by the way , i use photomod ver 3.7.
additional info: in measuring tie points part ( in photomod AT ) i see different coordinates for each point
for example
in photomod At module i see -2.121,0.819
but
in PATB file i see -2.064,1.089 for same point |
|
Back to top |
|
|
Dmitry Kochergin
Joined: 29 Sep 2004 Posts: 54 Location: RACURS
|
Posted: Wed Jul 16, 2008 1:22 pm Post subject: |
|
|
Probably you have to play with an option "Camera parameters taken into account" Maybe the difference between the coordinates is equal to the Principal Point dX dY... |
|
Back to top |
|
|
Anonymous Guest
|
Posted: Thu Jul 17, 2008 10:47 am Post subject: hi |
|
|
hi Dmitry
i am sure i have not any play with an option "Camera parameters taken into account"
by the way i am use photomod for close-range photogrammetry :) |
|
Back to top |
|
|
|